Discount Ramps.com Blog

Discount Ramps is proud to now offer the drop-tail motorcycle dolly. We know that the motorcycle lovers out there want to keep their bike in prime riding condition. This bike dolly allows you to move your bike anywhere. This is a must have for you ladies and gentlemen who have “low profile” motorcycles, as it can handle anything from big full dressers to the much smaller Sportster and even your import sport bikes. As riders know, most bikes must be stood up–not on the kickstand–to check the oil and make repairs. This new cycle dolly product line makes it easier to do all of these tasks and more all year round. If space is an issue, this dolly makes it less work and a lot easier to store your bike by allowing the motorcycle to be stood up against a wall or in the corner of your garage. It will not damage any of your personal accessories or saddle bags. The heavy-duty construction makes it fast, safe, and easy to store or move your bike. Simply ride the bike on to the motorcycle dolly and notice that there is no struggling to get it up on the dolly like some other garage dollies. Then, set the kick stand or simply get off the bike (If you are using the Cycle Glyder Pro) and you can now push it where ever it needs to go! The operation of these motorcycle dollies is effortless and allows you to move up to a 1,500 lb bike.

We have two cycle dollies that you can choose from. They are the Cycle Glyder and the Cycle Glyder Pro. Both of these motorcycle dollies have the same weight limit of 1,500lbs, “ride on, ride off” loading and unloading, as well as ten non-marking caster wheels. They both have the same Ergonomic release handle and ten locking wheels so that the bike does not go anywhere unless the operator wants to relocate it. The heavy duty construction and a powder coat finish keeps these cycle dollies from getting beat up over many years of use. Not only that, but they also come with a limited one year replacement warranty.

Below you will see our standard Cycle Glyder Drop-Tail motorcycle dolly. This model is a little bit shorter than the Pro model and has dimensions as follows: 85″ L x 33.2″ W x 3.6″H and it’s 7.1′ length and a 2’9″ width. The entire dolly system only weighs 73 pounds!  This dolly features a seven way adjustable kickstand; this is very nice for many different positions and ride heights of the bikes. It also slides together and locks for easy transportation or storage use. As you can see by the picture below, the bike stands straight up which makes cleaning and working on the bike much safer and easier than ever before.

The second model is the Cycle Glyder Drop-Tail Pro. This version is a little bit bigger, as you can see from the following dimensions: 85″ L x 37.8″ W x 17.4″ H and it’s 7’1″ Length x 3’2″ Width. This motorcycle dolly system weighs  just slightly more than the previous model, as it weighs 103lbs. The Cycle Glyder Pro comes with a pair of drop tail tie down straps to make sure the bike is secured in place for transportation or storage needs. Also, the PROMAX wheel chocks come with already equipped on this Pro model thus keeping the wheels set in place for an even safer and quicker operation. As you can tell by the picture below, everything you need is right here in the Pro model motorcycle dolly. When using the Cycle Glyder Pro it is recommended to use the drop tail tie downs and the Promax wheel chock at the same time. These dollies are great for Harley owners who have low bikes and want to store or repair them in or around the garage. Note: The straps and chocks have been designed to not scratch or damage your bike if used properly.

For more information about these two motorcycle dolly models visit the Drop-Tail Cycle Glyder Product Page.

For more information on our other motorcycle dollies and stands visit the Motorcycle Stands Category.