Discount Ramps is proud to bring to you the MC-2900 motorcycle wheel chock! This wheel chock gives you the stability you need to safely work on, transport, or store your motorcycle. To load your motorcycle into the wheel chock, you push or drive over the cradle, and when you go over the centering cradle it locks your front wheel into position. Unloading the bike is even easier — simply pull the motorcycle back and the cradle will disengage the wheel. The MC-2900 wheel chock is engineered to flip up and lock your wheel and tire into place. Not only is this wheel chock light, but it is constructed from a high grade steel, which will allow the chock to withstand the typical wear and tear that comes from everyday use. The motorcycle chock can be mounted to the bed of your pickup truck, trailer, or any other flat surface that has the capacity to hold this four bolt system down. The chock includes the mounting and assembly hardware. This motorcycle wheel chock has a pivoting cradle with 12 different adjustment positions to make sure that it fits your needs. The motorcycle trailer wheel chock will work with a variety of different motorcycles and will fit wheels as small as sixteen inches in width. A strategically placed four bolt mounting system is used to hold the chock in a permanent place, such as on most truck beds, trailers, table lifts or garage floors.
The MC-2900 wheel chock has a 10.5 inch wide by 15.5 inch long base. The motorcycle chock stands 14 inches high and features a 6.25 inch wide cradle that is ten inches in length. The seven gauge, steel base plate that holds the MC-2900′s 6.75 inch cradle fits almost any motorcycle tire. Weighing in at only 15 pounds, the MC-2900 motorcycle wheel chock is lightweight and a safe way to store or work on your motorcycle. The MC-2900 is currently offered in a black powder-coated finish with a zinc coated cradle; please see this wheel chock picture for a clear view of the finish on the wheel chock. It comes with a one year manufacturer’s limited warranty.
The wheel chock is not recommended for 21 inch wheels and bigger and should be used with motorcycle straps for a complete securing system. Discount Ramps recommends that you use the Black Widow motorcycle tie-down strap; these straps are safe, convenient, and dependable and come in a variety of styles (strap, ratchet, and snap hook style). We also have a variety of basic motorcycle strap kits with soft loops for all of your needs. To learn more about the Black Widow tie-down straps or the DiscountRamps tie-down strap kits please visit our motorcycle tie-down kits website.
To learn more about the MC-2900 Motorcycle Wheel Chock or to place a order please visit our motorcycle accessories website!