Practical advice for all your Loading, Hauling & Transport needs

Video – AMC-600-2 Double Motorcycle Carrier Assembly

Apr 19, 12 • How-To, Powersports, VideoNo CommentsRead More »

http://www.discountramps.com/double-motorcycle-carrier.htm

The AMC-600-2 double motorcycle carrier is the ultimate solution for transporting two motocross bikes without the complications of pulling and storing a trailer. Don’t waste valuable trail riding time – load your dirt bikes on this double motorcycle rack in less than 5 minutes. The AMC-600-2 aluminum double motorcycle rack mounts in your class III or IV 2″ trailer hitch and includes a reverse anti-tilt locking device that pinches the main tube into the trailer hitch to eliminate any rocking motion, creating a rock solid double motorcycle carrier. The 45.5″ long x 5-5/8″ wide loading ramp stores directly on the motorcycle carrier with two wing nut bolts. This double motorcycle rack has been specifically designed for transporting motocross bikes, enduro bikes, off road dirt bikes, and some scooters with larger wheels (limitations may apply with the 16″ gap in rail).

The weight capacity of the hitch tube is 600 lbs and the carrier rail is designed to handle motorcycles up to 400 lbs maximum overall weight (example: 400 lb bike + 200 lb bike). The motorcycle carrier rail is 75″ long x 5.5″ wide and has a 16″ gap where the front wheel drops partially in to stabilize the motorcycle, acting as a wheel chock. Please measure your scooter or kid’s motocross bike to make sure the wheel is large enough so it does not drop through the front wheel gap. Click here to view dimensions of the double motorcycle carrier. This motorcycle carrier also includes a 45.5″ lightweight aluminum loading ramp for loading your cycle on the carrier and it conveniently attaches on the carrier next to the carrier track for transport. This motorcycle hitch carrier has a carrying capacity of 600 lbs so please check your vehicle’s hitch rating as well as the suspension carrying capability of the carrying vehicle. This carrier comes standard to fit in a 2″ square class III, IV, or V 2 inch receiver. This aluminum motorcycle carrier works great for pick up trucks, vans, and SUVs. This double motorcycle carrier is designed for motocross bikes and enduros. It is not for sport bikes, cruisers or street bikes. If you are looking for a motorcycle carrier for street bikes, see our sport motorcycle carrier. If you are looking to transport one motocross bike, we have an AMC-400 single aluminum motorcycle carrier if you only need to transport one motorcycle.
Need a class III or IV hitch for the AMC-600-2? Check out the Hitch Selector to find a trailer hitch for your vehicle!

Tie down straps are sold separately. We have a quality tie down straps for motorcycle carriers below. We recommend using one basic strap kit per bike and a wheel tie kit to secure your motorcycles.

http://www.discountramps.com

Tags: , , , , , , , , , , , , , , , , , , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Current day month ye@r *