Portable Pit Stop manufactured by Race Ramps ™
Here at Discount Ramps, we know that if you’re looking at a portable pit stop, in some way, you are car crazy. This is the portable pit stop featured in the February 2009 issue of car and driver magazine. We are pleased to be able to offer our customers with this new portable pit stop ramp/platform system built by Race Ramps™. This multipurpose ramp and platform can be used for pitting your race car, displaying your show car, or working on your own car. All that you need to do is drive up the ramps and apply the vehicle parking brake. Once you have done that, you can remove the middle platform components allowing you to maneuver freely under the vehicle to make your changes to the car. When you’re finished servicing or adjusting your vehicle simply place the middle platform sections back into place and move the ramps to the other side which will allow you to get back in the action without having to back your vehicle down the ramps. The Race Ramps™ Portable Pit-stop is made from the highest quality slip-resistant material and can take up to a 6,000 pound vehicle. This ramp and platform system lets you get your car 14 inches in the air to display or work on. Unlike many other ramps and platform systems, this setup uses the same non-skid material that Race Ramps™ has been known for, and that allows you to safely use the item on almost any surface.
This ramp system is made in the USA and has a one year manufacture warranty. This is the portable pit stop has been featured in the February 2009 issue of “Car and Driver” magazine, as well as: Automobile Magazine, Super Chevy, Perfect Interface, Truck and SUV magazine, SEMA Digital and Hotrod online. This is a revolutionary car ramp and platform system, and is able to be fully disassembled to allow for maximum portability. This also means that this is one of the only car ramp platform systems available that lets almost instant access to under the car for quick servicing. EVERYTHING IS MODULAR!
The Portable Pit Stop ramp pieces weigh a total of 175 lbs, and not one piece weighs more than 40 pounds; this makes moving and setting up this ramp an easy job. No more heavy or sharp-edged steal ramps! The weight capacity of these ramps is 6,000 pounds. You can get product number, RR-PPS, which is the standard portable ramps without the cutouts for the scale ramps, or the RR-PPSR, which is the race model and has cutouts to get your vehicle on scales for accurate weight scaling during track times. The Race model also comes with a spacer to fill the cutout when scales are not needed. Both of these Portable Pit Stops are 14 inches high, and they are 98 to 110 inches long. If your car has a wider wheelbase then 110 inches, contact us and we can make something work for you! You enter the ramp on a ten degree angle so your car does not bottom out.
As you all know, we try our best to inform our customers so that you know all the safety precautions to take with any item we sell so you don’t get hurt. So before using these ramps we ask you to make sure everyone is clear from the ramps. Never use two ramps on one side of the vehicle. Always be careful to drive up the ramp with the wheels pointed straight and make sure to apply the parking brake. Once you’re done driving the car up on to the platform and putting the parking brake on we recommend that you verify the vehicle is secure and that it won’t roll in any direction. It’s important when you’re done with your work, that you slowly back down the ramps to ensure you don’t rip off or damage any body work. When utilizing equipment like this you will want to exercise extreme caution to keep everyone and everything safe from damage or injury.
If you would like more information about this ramp & platform product see our product page for this Race Ramp Portable Pit Stop.
If you’re interested in seeing our other ramp and platform products view our main Repair & Car Service Ramps Page.
