MT 3000 Mobility Carrier

Discount Ramps now offers the MT 3000 Mobility carrier for those of you who would like to carry your scooter or power chair on the hitch of your vehicle. With the MT 3000 mobility carrier transporting your wheel chair or motorized scooter can be easy and safe. The carrier is able to support of to 350 pounds and will work with any class II, III, or IV hitches. The MT 3000 carrier is a vehicle hitch mounted carrier with a ramp that allows you to easily load and unload a variety of equipment — from power chairs and scooters to snow blowers and yard equipment. Its built from a powder-coated and welded steel, and no assembly is required. The platform and ramp are a lightweight, corrosion resistant aluminum, so little to no maintenance is required either. Mobility devices can be expensive, but the MT 3000 mobility carrier is an inexpensive piece of equipment that can support up to 350 pounds, meaning it can accommodate most of the units on the market. The under frame of this unit is made from a heavy duty powder-coated steel designed to last a lifetime. The deck of the MT3000 is made from high grade powder-coated aluminum that increases stability but reduces the overall weight of the system. Both the deck and the ramp feature a slip-resistant, black grip tape to make loading and unloading that much easier. With this system you just attach the carrier to your hitch and you’re ready to go! No assembly is required — it comes directly from the factory pre-assembled. This TrekAway mobility carrier allows you to add an optional Class II hitch adapter for 1.25 inch hitch receivers or an optional High Height adapter for vehicles with less clearance. The MT 3000 Mobility Carrier comes with a one year warranty.

The Discount Ramps model number for the MT 3000 Mobility carrier is MT3000. The overall platform dimensions for the MT 3000 are 51 inches long by 32 inches wide and 8 inches wide. This toy and chair carrier is 48 inches long on the inside and is 30 inches wide inside and 6.75 inches high. The overall weight of this mobility carrier is 70 pounds, but can carry up to 350 pounds. The ramps dimensions are 48 inches long by 26 inches wide allowing it to fit safe and snug on the platform. The MT 3000 works with II, III, and IV class hitches. The welded construction for the MT 3000 and the powder-coated finish give you added strength while having to do very little maintenance. The platform of this mobility carrier is made from an aluminum construction, while the under frame is made from steel for greater weight reduction and greater capacity. The aluminum loading ramp has a slip resistant tape for maximum grip while loading, and the ramp also folds up into the rack. This item has a 1 year warranty and works with 1.25 inch receivers.  The MT 3000’s limitations are it’s 350 pound weight restriction, and the vehicle hauling capacity is limited by your vehicle’s capacity to carry a load. This hitch mounted rack will not work with class I receivers. Some vehicles may require air shocks or heavier springs to prevent it from sagging.

If you would like to learn more about the MT 3000 by PVI or would like to place an order, please visit our mobility carrier website. Discount Ramps also offers a silent hitch pin that gives you a rattle and noise free drive. Designed for class III and IV hitches come with a barrel lock and chrome coating. A heavy duty spring nut with a counter boring sleeve prevent the road noise. This hitch pin also comes with a rubber dust cap on the lock to prevent little debris from entering.